Chiller Units

Portable or Central — Water or Oil

Water Temperature Control Units

Micro Series

Micro-Manage Your Temperature Control Needs
Features:

Easily removable panels for quick access to internal components
Pressure switch
NEMA 1 electrical enclosure
250°F maximum operating temperature
Motor circuit protector
Independent safety thermostat
1 year parts and labor warranty at the factory
3 year warranty on controller and probe
Additional options available

2010, 2012 Royal Series

Technological Innovation Through Rugged Simplicity
Features:

Compact, rugged cabinet with easy-access side panels
Cast-and-flange design to reduce connection points
Half- and full-heat capability
Dual stage Incoloy™ immersion heater with IEC contractors
NEMA 12 electrical enclosure
M2B+ microprocessor controller
Brand fusing
Automatic vent sequence
Operating range of 32°F to 250°F (0°C to 121°C)
Non-fused lockable rotary disconnect
Forward-facing liquid-filled To and From Process pressure gauges
150 psig (1,034 kPa/10.3 bars) pressure relief valve
Additional options available

CDT Series

Designed to Handle Your Needs
Features:

Process pumps available in .67 or 1.5 hp
1/4” X 9/32” orifice cooling valves
3/4" female NPT common cooling water in and cooling water out connections terminated in ball valves
Liquid-filed water supply pressure gauge
1/8” male NPT common air purge connection
Individual 1/16th DIN controllers with a separate 24-hour time clock for automatic startup and shutdown
All non-ferrous construction
Cooling valve and heater
Additional options available

9012 Series

Stay In Production While You Wait to Fix Those Leaks
Features:

Unit operates in either a positive or negative mode. Adjusts easily via the operation of an external hand-operated valve handle
Three phase 9 kW electric immersion heaters are suspended vertically for long heater life
Designed for easy substitution for any standard water temperature controller
It uses the same hose and piping connections and does not require external air source
An integral air separator automatically vents air from the system.
Eliminates manual requirement for the operator
Reduces production losses by enabling you to postpone repairs until the end of a production run
Under negative pressure operations, water cannot leak out as in a conventional pressure system
Quick interchangeability reduces downtime by getting you back into production fast
Additional options available

SEU Series

Manage All Your Temperature Control Needs
Features:

NEMA 1 electrical enclosure
Centrifugal pump
Incoloy® heater
Solenoid valve
Adjustable low pressure switch
1/16DIN off-the-shelf control
Additional options available

Oil Temperature Control Units

6010 Series

Full Size Performance In a Small Compact Design
Features:

Pressure switch interlock for heater
Safety thermostat
Auto pressure-actuated bypass valve
Heavy-duty positive-displacement pump
All controls and connectors are ideally located for convenient hookup
Additional options available

2016M Series

Maximum Performance Maximum Footprint
Features:

Compact footprint minimizes floor space
NEMA 12 enclosure with I.E.C. electrical components meets NFPA 70 &
79 electrical standards, with branch fusing, disconnect switch and single-point connections
High efficiency 1 & 2 hp positive displacement pump, capable of pump reverse to evacuate the process
Oil pressure switch
Process oil bypass line for heater
To-process pressure gauge on all units
Expansion / reservoir tank for easy pump-down of system
Auto-vent sequence
Removable top, side and rear access panels
Safety thermostat
Additional option available

2016U Series

Combine Precise, Automatic Temperature Control With Easy Operation
Features:

550°F temperature
Heaters from 12-48 KW
Flows from 18-50 GPM at 30-50 PSI
NEMA 12 electrical
Positive displacement mechanical seal pump
Front-mounted fluid sight gauge
Simplified piping design
Advanced M2B+ controller
Rotary through-the-door disconnect switch
Low level alarm
Manual bypass
Fill port
User-friendly controls with pump start, stop and reverse buttons, mode selection switch and audible alarm
Single-pass heater tank
17-gallon expansion / reservoir capacity
Shrouded sight glass
Reservoir drain pipe
Check valves to water supply and drain lines
Vent outlet
Removable top, side and rear access panels
Industrial grade casters
Forklift rails
Additional options available

6017 Series

Temperature Control For The Big Jobs
Features:

Viking positive displacement, packed pump with drip return pump
TEFC Pump Motor
NEMA 12-style electrical control enclosure with IEC electrical components
Disconnect switch
Pressure-actuated bypass valve
System status graphics display
To Process oil pressure gauge
Temperature to 550°F
Heater sizes from 50 to 200 kW
Pump rates of 90, 150 or 200 gpm
UL listed electrical subpanel
Optional cooling capabilities
M2B+ controller standard
Low level alarm
Autoshutdown (M2B+ controller)
Additional options available

Portable Chillers Units

SMC Series ½ to 1 ½ hp

Big Features In A Small Package
Features:

Hermetic reciprocating compressors
Tube-in-tube evaporators
Fin- and tube- air cooled compressors
HFC-134a on ½ and 1 hp, HCFC-22 on 1 ½ hp
230v/1/60 electrics
NEMA 1 electrical enclosure
Efficient, insulated pump and evaporator
High and low refrigerant pressure cut-outs
Hot gas bypass capacity control
Thermal expansion valve
Refrigerant sight glass
Filter dryer
Dimensions: 26” x 20” x 36 ½”
Additional options available

SMC Series 2 to 40 hp

Advanced Technology For Enhanced Performance
Features:

Easy access panels
1 year compressor and labor warranty; 2 year parts warranty; 3 year limited controller warranty
NEMA 12 electrical enclosure
Low rpm blower designed to reduce noise (20 – 30 hp)
Non-fused disconnect switch with single point power connection
Branch motor fusing
“Y” strainer on process water line to evaporator
1/16 DIN PID auto-tuning, off-the-shelf modular controller is accurate to within +/- 1°F
Stamped, stainless steel, horizontally mounted pump assures reliability
Non-ferrous piping (2 -30 hp) air cooled units feature aluminum fin / copper tube condensers with easy on/off, washable air filters
Water-cooled units equipped with water regulating valves. 2-7.5 hp units have tube-in-tube condensers; 10-40 hp units have cleanable shell and tube condensers
Additional options available

Central Chillers Units

SCW Series

Screw Compressor Chiller 60 to 195 Tons
Features:

Semi-hermetic screw compressors
Stainless steel brazed plate evaporators (60 & 75 tons)
Shell & tube evaporators (90-195 tons)
Cleanable shell & tube condensers (water cooled)
Fin & tube condensers with -20°F ambient operation (remote air cooled)
Electronic expansion valves
R-134a refrigerant
All refrigerant safeties
Additional options available

SSC Series

Scroll Compressor Chiller 30 to 100 Tons
Features:

Hermetically sealed scroll compressors
Stainless steel brazed plate evaporators
Shell & tube condensers with water regulating valves (water cooled)
Fin & tube condensers with -20°F ambient operation (remote air cooled)
R-22 refrigerant
All refrigerant safeties
Additional options available

SSC-WT Series

30 to 100 Ton Chilling System
Features:

Scroll Compressors: The latest in rotational compression technology, hermetically sealed scroll compressors use 50% fewer moving parts than reciprocating compressors resulting in unparalleled efficiency, reliability and noise reduction
Interior Stainless Steel Reservoir (Dual Well): 100% non-ferrous stainless steel tank eliminates the need for routine tank maintenance. 1/2” tank insulation
Generously Sized Process and Recirculation Pumps: Optional dedicated standby pumps allow longer life (with automatic motor cycling) and reduced downtime due to pump maintenance and repair. Check valves allow automatic switchover (manual closing not required)
Full Size Lug Style Butterfly Valves: Allows complete servicing of one circuit while other(s) remain online
Automatic Water Makeup Valve With Baffle: Automatically adds water to the system to maintain desired level
Welded Steel Frame: One-piece construction is perimeter welded to minimize vibrations and includes convenient fork slots for easy maneuvering
Brazed Plate Evaporators: Very compact and efficient stainless steel units
Cleanable Shell and Tube Condensers: With the epoxy-coated heads easily accessible from the front of the unit, scale and fouling buildup can be removed quickly and easily
Water Regulating Valve (Water Cooled Units): Regulates the flow of water through the condenser for stable system operation
Hour Meters –Compressor & pumps
Branch Fusing: Provides additional Protection for individual motors
Compressor phase protection
Audible / visual alarm indication
Refrigerant: R22

Outdoor Series

An Efficient, Space Saving System For Process Cooling

30RAN Scroll Compressor Models

Features:

10-60 ton cooling capacity (11 models)
Hermetic scroll compressors
Direct expansion type brazed plate evaporator(s)
Aluminum fin/copper tube condenser with direct drive reinforced polymer fans
R-22 refrigerant
Standard ambient operation from -20°F to 125°F(-29°C to 52°C) Wind baffles required for -20°F operation
Standard leaving water temperature setpoints are from 40°F to 70°F (4°C to 21°C). Other setpoints ranges are available upon request
Two independent circuits on 035 and 055
Refrigeration(s) circuits include filter dryer, sight glass and thermal expansion valve
Safeties include: high and low refrigerant, freezestat, phase loss motor overload, and reverse rotation of the compressor
Additional options available

30RB Screw Compressor Models